SW70+HT1800, equipped with the instant hot water unit, is a professional extractor with two 3-stages high waterlift vacuum motors, for an excellent result and a very short drying time.
The Santoemma high waterlift vacuum system allows for excellent cleaning results
and a very short drying time.
The use of hot water allows a more effective cleaning of very dirty textiles.
The two tanks, 70 litres each, enable a long autonomy of operation.
Dedicated brackets allow to hang hoses and wand on the machine, to
easily move the complete machine from site to site.
The hand-tool for upholstery cleaning is available in plastic (NS10PN) or in aluminium (NS10ALL). With an optional wand it is possible to clean carpets and hard floors as well.
The optional device SMARTKIT-SW50C allows you to perform chemical automatic dilution, prespray and rinsing.
Car washes, cleaning companies.
- Instant heating system which allows to clean with hot water immediately after the machine is switched on. The use of hot water makes it possible to wash heavily soiled fabrics more effectively.
- The two special 3-stages High Waterlift motors allow an excellent cleaning result and a very short drying time.
- The vacuum power allows a fast cleaning.
- Long working autonomy thanks to the big tanks, 70 litres each.
- Hand tool with robust design and in-frangible material, suitable for heavy use.
- Shape of the hand tool allowing to clean in hard-to-reach areas.
- Special profile of the vacuum tool, which allows a better suction, for a shorter drying time.
- Transparent hand tool, allowing to see the water recovered and the complete drying.
- Spraying valve specially designed to avoid any breaking.
- Quick disconnect spray nozzle, which can be removed by hand without using any tool. The nozzle can be easily cleaned.
- The optional device SMARTKIT-SW50C allows you to perform chemical automatic dilution, prespray and rinsing.
- Detachable tanks. The machine can be carried easily even in a small car.
- High density polyethylene tanks, very strong and made for lasting a long time.
- Transparent unbreakable cover, which allows to see the dirty water while it is sucked.
- Easy to reach hole for filling the tank with clean water.
- Drainpipe for easily emptying the recovery tank.
- Drain valve for draining completely the solution tank.
-
The filter of the vacuum motor is easy to reach and removable for an
easy cleaning. Its large filtering surface area allows it to work for a
long time at maximum suction power.
- The gaskets are replaceable by hand since they are not glued. Easy to clean and change.
- Strong wheels, in antimark rubber.
- Brass quick-disconnect couplings, reliable and strong.
- Water pump with bypass, which allows an automatic regulation of the optimal water flow according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
- Pump built on Santoemma specifications, for a longer life.
- Vacuum motor with thermal protection against overload.
- Vacuum motor treated against rust.
- Both motor and pump can work continuously.
- Modular design that makes the maintenance easier. The maintenance of the machine can be done at low costs.
|
Recovery tank capacity:
|
70 litres |
Solution tank capacity:
|
70 litres |
|
Vacuum motor:
Power:
Maximum waterlift:
Maximum air flow:
|
2 motors -3 stages - High waterlift
2 x 1500 W
3400 mm H2O
90 l/sec. |
|
Pump with bypass:
Power:
Maximum pressure:
Maximum water-flow:
|
vibrating
70 W
4 bar
1,5 l/min |
|
Cleaning width:
|
100 mm |
|
Instant hot water unit:
|
included (HT1800) |
SMARTKIT system
(for automatic chemical dosing, prespray and rinsing):
|
Optional (SMARTKIT-SW50C)
|
|
Number of nozzles:
|
1 |
|
Cable lenght:
|
10 m |
|
Hose lenght:
|
5 m |
|
Weight (machine body):
|
62 kg |
|
Weight (packaged machine):
|
68 Kg |
|
Dimensions:
|
cm 50 x 89 x 98 h |
|
Package dimensions:
|
cm 57 x 94 x 98 h |
|
Units/pallet:
|
4 pcs/pallet
(cm 94 X 120 x 210h) |
|
Standard color:
|
Blue |
|
Tank construction:
|
High density polyethylene |
|
Sound pressure level (3m/1m - ISO3744):
|
67 dB(A) /73 dB(A)
|
|
Power supply:
|
cable - 220-240V 50-60Hz
(other voltages on request) |
WATER TEMPERATURE INCREASE (Delta T)
WITH RESPECT TO THE INPUT TEMPERATURE
Water temperature increases when using nozzles with smaller sections.
|
|
Tool used
|
Delta T with continuous flow
|
Delta T with typical use (brief intervals without spraying
)
|
| NS10PN-M |
~ +32°C |
~ +43 °C |
| NS270N-M |
~ +29°C |
~ +39 °C |
|
It is possible to pre-heat the water, in order to obtain higher temperatures.
The thermal protections limit the maximum temperature at 65°-70°C.
|
Included accessories
The machine is supplied as standard with the following accessories:
Recommended accessories and devices
In order to optimize the results that can be obtained by this model, we suggest the adding the following accessories and special devices:
Other compatible accessories and devices
Below are listed all the accessories and devices that can be used with this machine
