SMARTVACUUM-15 can be connected to the machine immediately.
The dust is collected in the bag inside the accessory and always remains separate from the dirty water, which is contained in the machine's recovery tank.
Dust vacuuming is done very effectively by the high-waterlift vacuum system of Santoemma machines.
Switching
between injection-extraction mode of operation and dust vacuuming mode is very simple and is done by appropriately connecting the vacuum hoses.
Since dust and liquid are always separated, before vacuuming dust, it is not necessary to empty the dirty water tank and dry it, to insert the bag into the machine.
After vacuuming dust, to clean by the injection-extraction method, it is not necessary to remove the dust bag.
Accessories for vacuuming dust
SMARTVACUUM-15 can be connected to different vacuum tools through the vacuum hose which is supplied as standard with the machine, with no need of additional hoses.
SMARTVACUUM-15 comes standard with 3 dust accessories: 353 crevice tool, TST.023 forniture nozzle, 354 dusting brush. Other accessories can be combined as options.
The TACC-ROTO-NE tool is an optional manual accessory equipped with a rotating brush for more effective dust removal. It is ideal for cleaning upholstered fabrics, sofas, armchairs, and mattresses. The rotation of the brush is activated by the vacuum power of the motor.
35761C is an optional accessory with rotating brush with 270mm cleaning width. Ideal for carpet, rugs and floors.
Every tool in its place!
In addition, SMARTVACUUM-15 allows the following to be conveniently stored on the machine: the accessories for vacuuming dust, the power cord, a canister of detergent, the hoses and the hand tool for injection-extraction cleaning.
Support for wands
For Sabrina and SW15 models equipped with SMARTVACUUM-15, the 491533 support is available as an option, which also allows one of the wands: NS270N, NS400P or 35761C to be housed on board the machine.
For the Sabrina-HOT, SW15-HOT, and SW15-FOAM-LIGHT models, the 491536 support is available instead.
.jpg)
Some models that can be equipped with SMARTKIT-15
CART15+SMARTVACUUM
is an optional Kit for the Sabrina and SW15 models that allows you to store all accessories on board the machine and easily transport the machine from one place to another, thanks to its ergonomic handle and its 4 oversized wheels.
In addition, the CART15+SMARTVACUUM kit
includes the SMARTVACUUM-15 dust tool. So it can be combined with the Sabrina and SW15 models , as an alternative to the SMARTVACUUM-15 accessory.
Supplied as an assembly kit.
The CART15+SMARTVACUUM Kit includes:
-
Complete cart
with handle and 4 oversized wheels
-
Metal bracket
to accommodate SMARTVACUUM-15 on the top of the cart.
-
SMARTVACUUM-15
-
The 491533
support for injection-extraction skids or powder accessory 35761C.
A
metal bracket
, supplied as standard with the cart, holds the SMARTVACUUM-15 accessory slightly elevated from the upper tank of the machine so that the upper tank can be easily removed for loading and draining water.
The CART15 kit also includes the 491533 wand support. The 491533 support can be used to store one of the carpet or floor injection-extraction wand, or the 35761C dust extraction tool, on board the machine.
Technical details of the CART15+SMARTVACUUM Kit
|
Waterlift of the machine with
CART15+SMARTVACUUM:
|
3000 mm H2O |
|
Compatible with H10-M hoses?
(Standard hoses supplied with Sabrina and SW15)
|
Yes |
|
Bag capacity:
|
2 liters |
|
Material:
|
Metal + High-density polyethylene |
|
Weight:
|
10 kg |
|
Weight (
packaged tool
):
|
11 Kg |
|
Dimensions:
|
cm 40 x 74 x 82 h |
|
Package dimensions:
|
cm 40 x 76 x 28 h |
|
Units/pallet:
|
21 pcs/ pallet
(cm 80 x 120 x 210 h) |
