Powertec30 is a patented machine for cleaning and sanitizing small and middle-sized restrooms, in areas open to public. It combines spraying of a fluid foam, rinsing and vacuuming. With Powertec30 restrooms can be completely cleaned, sanitized and left perfumed and dry in a short time, making the cleaning operations more pleasant and effective as well.

Using the machine is immediate and does not require any training for the operator.

Small and light, it can be easily stored or carried from place to place.

The cleaning process is carried out through four stages:

1. Spraying of foam on all the surfaces to be cleaned (walls, sanitary fixtures, showers and panes),
2. Chemical action against dirt and bacteria,
   
3. Rinsing with clean water,
4. Floor washing with injection-extraction system.

The manual gun allows you to spray fluid foam and to rinse surfaces with clean water.

The special wand included allows you to clean hard floors with the injection-extraction system: a chemical solution is sprayed on the floor and vacuumed. The dirt detached from the floor is completely removed thanks to the powerful vacuum and collected in the recovery tank.

In few second the floor gets perfectly dry and with no effort. It is possible to inject and vacuum simultaneously, or to inject, brush and then vacuum. A specific bristle on the vacuum head allows you to brush efficiently very dirty floors.

It is not necessary to manually dose the chemical, because the machine automatically picks up the right quantity of chemical from the chemical tank and mixes it with clean water, taken from the water tank.The chemical is always used in the correct quantity and never wasted.   

Powertec30 allows a sanitizing chemical to be nebulized to quickly sanitize previously cleaned surfaces and environments. It is possible to use two nebulization systems:

a) nebulization@100micron - for surfaces

b) turbo-nebulization@50micron - for surfaces and environments

Nebulization@100micron

With a specific manual gun it is possible to nebulize a sanitizing chemical in the form of a liquid solution in 100 micron particles. With the nebulization at 100 micron the particles deposit evenly on the surfaces wetting them slightly and after a few minutes the particles evaporate, leaving the surfaces dry. In this way the chemical is able to act for the necessary time to carry out its sanitizing action. This is the ideal solution to quickly sanitize all washable surfaces.

Turbo-nebulization@50micron

Using a specific hand gun for turbo-nebulization@50micron it is also possible to deliver a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.

Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly. 

With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.