Foamtec70

Ideal model for cleaning and sanitizing particularly large restrooms, by spraying a compact foam, rinsing and vacuuming.

It allows you to clean even very dirty areas, leaving them clean, sanitized and perfumed. It is ideal for periodic deep cleaning interventions.

Power supply
cable

Complete cleaning/ Quick sanitization
120m²+20 sanitary fixtures in 25/2 minutes

Tank capacity
70/70 liters

Foamtec70 is the biggest model in the range of machines working with Santoemma patented Foamtec system. This machine allows to completely clean and sanitize public restrooms, by sprayinga compact foam, rinsing and vacuuming. Foamtec70 is indicated for big areas.

The cleaning process is carried out through four stages:

Spraying of foam on all the surfaces to be cleaned (walls, sanitary fixtures, showers and panes),
Chemical action against dirt and bacteria,
Rinsing with clean water,
Vacuuming of residual water from floor.

Using optional devices, the same machine also allows a chemical to be nebulized to quickly sanitize previously cleaned surfaces and environments.

Santoemma has developed 3 nebulizing systems to provide the ideal solution in every situation:

a) nebulization@100micron - for surfaces

b) turbo-nebulization@50micron - for surfaces and environments

c) dryfog@7micron - for surfaces and environment

Nebulization@100micron

The Foamtec models, equipped with a specific gun, are able to nebulize the sanitizing chemical in the form of a liquid solution in 100 micron particles. With the nebulization at 100 micron the particles deposit evenly on the surfaces wetting them slightly and after a few minutes the particles evaporate, leaving the surfaces dry. In this way the chemical is able to act for the necessary time to carry out its sanitizing action. This is the ideal solution to quickly sanitize all washable surfaces.

Turbo-nebulization@50micron

By using a specific hand gun for turbo-nebulization@50micron it is also possible to deliver a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.

Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.

With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.

Dryfog@7micron

Moreover, by adding a special Santoemma device, it is possible to deliver a sanitizing chemical in the form of 7 micron dry fog. The dry fog is delivered for a time sufficient to completely fill the rooms and then left to act for a few minutesafter saturation in order to exercise its sanitizing action. This type of dry fog allows you to reach every point, without wetting the surfaces. The machine can be left inside the room to be treated. Alternatively, you can leave the machine out of the room, placing inside only the chemical tank.

Foamtec70 can be used for large areas, such as:

Factories
Exhibition halls
Stadiums, arenas
Airports, railways stations
Any other big restroom open to public.

Santoemma patented Foamtec system is the best solution to the problem of cleaning and sanitizing even very dirty restrooms, with several advantages on any other cleaning system:

Better cleaning and sanitising result: foam does not immediately fall onto the floor, but stays on the surfaces where it has been sprayed for some minutes. This ensures both the cleaning and sanitizing action. Laboratory tests certify that using the machine with specific chemicals allows you to kill 99,9% of bacteria.
Visual effect of foam: foam covers in white all the surfaces where it is sprayed such as walls, sinks, fixtures. The operator can therefore check that every corner has been covered, for a complete action in every point.
The greatest hygienic safety for the worker, who does not come in contact with the surfaces and the objects to be cleaned and who does not get wet by the bouncing water, because rinsing is done with low pressure.
Reduced labour for the worker: manual work is reduced to a minimum since the dirt is removed by the chemical action of foam and the following rinsing action.
This system, more comfortable and hygienic, gives a greater fulfilment to the worker.
Saving of time: while foam acts on the surfaces where it has already been sprayed, the worker is free to operate on the next surface. Therefore, even a big room can be completely cleaned quickly and with no idle time.
Detergent saving: the chemical is used without waste because it does not immediately fall onto the floor.
Reduced power consumption: the machine requires little electrical power and therefore it can be used in any places.
Reduced water consumption: Santoemma systems, rinsing with low pressure, require a minimal quantity of water. This avoids the flood of rooms, allows a longer working autonomy and offers the immediate availability of the rooms that have been cleaned.
The machine can be used also in places with no drains because it can completely vacuum the water remaining on the floor after rinsing.

Filling with fresh water is done by connecting the machine directly to the tap. When completed, filling is stopped by a floater, located in the water tank.
Dirty water is drained easily thanks to a sufficiently long hose.
The control/regulation panel is handy and the controls are simple and intuitive.
Switching from foaming to rinsing is very easy, rotating the proper levers situated on the control panel.
The tank containing pure detergent is placed in a special compartment and the detergent ia automatically sucked by the machine in the correct quantity .
All the accessories for cleaning and finishing are placed on the machine, so they can be easily used and carried.
Using optional accessories, a chemical can be nebulized with the same machine to quickly sanitize previously cleaned surfaces and environments.

Approximate performance:	room with 120m² of tiles + 20 sanitary fixtures
1) Complete cleaning and sanitizing: Time: Chemical consumption: Water consumption: Defoamer consumption:	25 min 1200 gr (10gr/m²) 70 liters max 70 gr
2) Quick sanitization:
2a) with Nebulization@100micron Time: Chemical consumption: Water consumption:	2 min 200 gr (2gr/m²) 3500 gr (30gr/m²)
2b) with Turbo-Nebulization@50micron Time: Chemical consumption: Water consumption:	3 min 240 gr (2gr/m²) -
2c) with KIT for Dry Fog@7micron Time: Chemical consumption: Water consumption:	12 min 480 gr (4gr/m³) -
Recovery tank capacity:	70 litres
Clean water tank capacity:	70 litres
Chemical dilution:	Pre-set around 4%
Continuous filling system:	YES
Vacuum motor: Power: Maximum waterlift: Maximum air-flow:	2 x 2 stages 2 x 1000 W 2200 mm H₂O 100 l/sec.
Pump with bypass: Power: Max pressure: Rinse pressure: Rinse water-flow:	Piston type, with adj. pressure 370 W 30 bar 16 bar 5 l/min
Compressor:	350W
Cleaning width (hard floors):	400 mm (with NS400P)
Cable length:	15 m
Spray hose/Vacuum hose length:	15/7,5 m
Weight (machine body):	105 kg
Weight (packaged machine):	131 Kg
Dimensions:	cm 54 x 100 x 138 h
Package dimensions:	cm 65 x 102 x 155 h
Units/pallet:	1 pc/pallet (cm 65 x 102 x 155 h)
Standard color:	Blue
Tank construction:	High density polyethylene
Noise pressure level (3m/1m - ISO3744):	69 dB(A) / 75 dB(A)
Power supply:	cable - 220-240V 50-60Hz (other voltages on request)
International Patents:	EP 22772603.1 + US 18/683358 + CN 202280057576.4