IdroFoamRinse400 is an innovative, electrically powered machine, patented by Santoemma, which allows you to spray a compact foam and rinse continuously.
The water used for foaming and rinsing is directly taken from the water network, therefore the machine has an unlimited autonomy. Pure chemical is contained in its separate tank and is automatically used by the machine in a controlled quantity. The internal air-compressor allows to produce foam with an optimal density, adjustable by the operator. It is not necessary to connect the machine to an external compressed air system.
Rinsing is performed thanks to a 30 bar pump, at an adjustable pressure.
The cleaning process is carried out through three stages:
-
Spraying of foam on all the surfaces to be cleaned (walls, sanitary fixtures, showers and panes),
-
Chemical action against dirt and bacteria,
-
Rinsing with clean water.
Using optional devices, the same machine also allows a
chemical to be nebulized to quickly sanitize previously cleaned surfaces and
environments.
Santoemma has developed 3 nebulizing systems to provide the
ideal solution in every situation:
a) nebulization@100micron - for surfaces
b) turbo-nebulization@50micron - for surfaces and
environments
c) dryfog@7micron - for surfaces and environment
Nebulization@100micron
The IdroFoamRinse models, equipped with a specific gun, are able to nebulize the
sanitizing chemical in the form of a liquid solution in 100 micronparticles. With the nebulization at 100 micron the particles deposit evenly on the surfaces wetting them slightly
and after a few minutes the particles evaporate, leaving the surfaces
dry. In this way the chemical is able to act for the necessary time to
carry out its sanitizing action. This is the ideal solution to quickly
sanitize all washable surfaces.
Turbo-nebulization@50micron
By using a specific hand gun for turbo-nebulization@50micron it is also possible to deliver
a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.
Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.
With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.
Dry fog@7micron
Moreover, by adding
a special Santoemma device, it is possible to deliver a sanitizing chemical in the form of 7 micron dry fog.
The dry fog is delivered for a time sufficient to completely fill the
rooms and then left to act for a few minutes after saturation in order to exercise its
sanitizing action. This type of dry fog allows you to reach every point,
without wetting the surfaces. The machine can be left
inside the room to be treated. Alternatively, you can leave the machine
out of the room, placing inside only the chemical tank.