Sabrina-Foam is a dense foam extraction machine with an internal compressor. The machine sprays a special dense foam onto the surface to be cleaned, which is sucked up after a few seconds, recovering the dirt. The special high-waterlift vacuum system makes it possible to remove the maximum amount of dirt and achieve a very short drying time.

Unlike a solution of water and detergent or a liquid foam, Santoemma's dense foam does not penetrate too deeply and therefore allows for an extremely short drying time: upholstery is dry in about 20 minutes.

Unlike a "dry foam", dense foam does not stay on the surface of fabrics, but penetrates a few millimeters into the layer where dirt is deposited. This gives a very effective cleaning result.

Sabrina-Foam is particularly suitable for upholstered fabrics, but can also be used with optional accessories for carpet cleaning.

This model can also work as an injection-extraction machine.

Sabrina-Foam can also be used with the special NS270BRUSH powerbrush wand, which enables even better results due to the mechanical action of the cylindrical brush.

Turbo-nebulization@50micron 

In addition, Santoemma dense foam extraction models can be equipped with the special gun for turbo-nebulization@50micron to sanitize small areas of carpet, rugs, upholstered fabrics, mattresses, curtains and vehicle interiors. With this gun it is possible to deliver a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.

Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly. 

With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.

Dry fog@7micron

Santoemma dense foam models can also be equipped with an optional device for generating dry fog@7micron. This system allows environments to be sanitized completely without wetting the surfaces.

This is the ideal solution for quickly sanitizing areas of various types, including: hotel rooms, offices, coaches, trains, ambulances and emergency vehicles.

The dry fog is dispensed long enough to completely fill rooms and then left to act for a few minutes after saturation in order to exert its sanitizing action.

The machine can be left inside the room to be treated. Alternatively, the machine can be left outside the room, placing inside only the chemical tank with the dry fog dispenser, connected to the machine with a 10-meter-long hose. The entire environment can be saturated in a few minutes without the operator remaining inside the environment.