Professional cleaning and sanitizing of textiles and mattresses
Santoemma UPHOLSTERY Cleaning program includes machines and chemicals developed for the professional cleaning of any type of padded textiles and mattresses. Different cleaning systems are available in order to comply with the specific application needs and the operators' cleaning preferences.
A solution of water and chemical is sprayed into the fibers of the textile and immediately sucked. The solution and the dirt removed are recovered in the machine body.
In upholstery and mattresses cleaning, the cleaning result can be improved by using a hotsolution, instead of room temperature solution.
Specific tests show that cleaning carpet with just 10°C more can give the same result as cleaning twice.
Santoemma machines can be equipped with an instant heater that allows you to immediately heat the water used for cleaning. In this way a much better result is obtained in cleaning upholstery and mattresses, even very dirty.
The maximum temperature is limited to 65-70°C in order not to damage the textiles. These temperatures allow you to effectively clean and sanitize upholstery and mattresses.
The use of hot water also reduces the dryingtime and is appreciated for working in winter and in cold areas.
A special dense foam is sprayed on the textiles and is sucked after some seconds.
Dense foam does not penetrate deep inside the textiles, therefore allowing a short drying time: seats can be dry in 20 minutes!
In order to obtain the special dense foam, the chemical solution is mixed with compressed air, obtained by a dedicated air compressor. The quality of foam is therefore much better than the "liquid foam" of machines without compressor.
Thanks to its optimal density, dense foam penetrates for few millimeters in the superficial layer where the dirt lies. It does not remain only on the surface, as it happens with "dry foam". Therefore, dense foam allows an excellent cleaning result, even without any mechanical brushing action.
The manual tool is very light and compact, for cleaning many seats or mattresses quickly and without effort. Its shape also allows you to reach any corner.
Turbo-nebulization@50micron
In addition, Santoemma dense foam extraction models can be equipped with the special gun for turbo-nebulization@50micron to
to completely sanitize
small carpeted areas, rugs,
upholstery, curtains and vehicle interiors. With this gun it is possible to deliver
a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.
Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.
With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.
Dry fog@7micron
Santoemma dense foam models can also be equipped with an optional device for generating dry fog@7micron. This system allows environments to be sanitized completely without wetting the surfaces.
This is the ideal solution for quickly sanitizing areas of various types, including: hotel rooms, offices, coaches, trains, ambulances and emergency vehicles.
The dry fog is dispensed long enough to completely fill rooms and then left to act for a few minutes after saturation in order to exert its sanitizing action.
The
machine can be left inside the room to be treated. Alternatively, the
machine can be left outside the room, placing inside only the chemical
tank with the dry fog dispenser, connected to the machine with a
10-meter-long hose. The entire environment can be saturated in a few
minutes without the operator remaining inside the environment.
This system, patented by Santoemma, uses hot dense foamwhich ensures excellent cleaning results even in case of extremely dirty upholstery and an even shorter drying time. The hot foam is immediately available as the machine is switched on.
This system is particularly appreciated to work in winter and in cold areas.
Turbo-nebulization@50micron
In addition, Santoemma dense foam extraction models can be equipped with the special gun for turbo-nebulization@50micron to
to completely sanitize
small carpeted areas, rugs,
upholstery, curtains and vehicle interiors. With this gun it is possible to deliver
a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.
Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.
With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.
Dry fog@7micron
Santoemma dense foam models can also be equipped with an optional device for generating dry fog@7micron. This system allows environments to be sanitized completely without wetting the surfaces.
This is the ideal solution for quickly sanitizing areas of various types, including: hotel rooms, offices, coaches, trains, ambulances and emergency vehicles.
The dry fog is dispensed long enough to completely fill rooms and then left to act for a few minutes after saturation in order to exert its sanitizing action.
The
machine can be left inside the room to be treated. Alternatively, the
machine can be left outside the room, placing inside only the chemical
tank with the dry fog dispenser, connected to the machine with a
10-meter-long hose. The entire environment can be saturated in a few
minutes without the operator remaining inside the environment.
When cleaning upholstery, the drying time after vacuuming strongly depends on the vacuum strength. Santoemma machines are equipped with a specially designed high waterlift vacuum system, allowing to get up to 50% higher waterlift than standard extractors. This results in an extremely shorter drying time than with normal machines.
Not only the drying time is reduced, but also a better cleaning result is obtained, since the extra solution extracted from fibers contains extra dirt removed from the surface. The same residual dirty solution, if left evaporating on textiles as it normally happens, would leave the surface not so clean as with high waterlift machines.
The machines of Santoemma UPHOLSTERY program can be conveniently used for cleaning:
Padded seats
Textile coverings of furniture, sofas, office furniture, walls
Mattresses
Small carpeted areas, as stairs or room entrances
Rugs
The above-mentioned textile surfaces are present in many environments where each model can be proposed as the best solution, considering the application needs and the user's preferences.
By clicking on the environment, it is possible to see the most indicated machines.
