Sharon-Brush is a self-contained machine with rotating brush, designed for professional cleaning of small areas of carpet and hard floor. Its small width (only 29 cm) allows the machine to be used also in very
narrow rooms. Sharon-Brush is indicated also for the hiring to private users thanks to
its strength and its ease of use. Its professional features make
Sharon-Brush suitable also for cleaning companies.
The mechanical action of the cylindrical rotating brush
allows dirt to be removed from the carpet down to the base of the fibers. Even
very dirty carpets are thoroughly cleaned in a single pass.
The Santoemma high-waterlift vacuum system
makes it possible
to completely extract detached dirt from the fibers and leave the carpet nearly
dry.
Even in the case of deep cleaning, the drying time is very
short and the carpet is walkable again after about 1-2 hours.
By turning a lever, the flow rate of water sprayed
can be reduced to perform a low moisture maintenance cleaning. In this case, the carpet can
be dry in about 30 minutes.
A special device makes it possible to switch from carpet cleaning to hard floor cleaning by simply turning a lever.
The NS10PN hand nozzle can be connected to the machine for
cleaning hard-to-reach seats and corners. Using the optional EVE.GUN-M hand gun and a
specific chemical it is possible to pre-spray carpet to soften dirt before cleaning
and quickly sanitize textile surfaces.
Cleaning companies, hotels, restaurants, clubs, pubs, offices, banks, shops, rental companies, private houses, carpet shops, trains, busses, planes, cinemas, theatres, ferry boats, ships, hospitals, nursing homes, fitness centres, schools, universities, places of worship, mosques.
-
Reduced width (only 29 cm) for professional cleaning even of small surfaces of carpet and hard floor.
- The High-waterlift vacuum system allows an incomparable dirt removal and a very short drying time.
-
The machine is light and easy to carry.
-
Water spraying can be operated simply turning the handle of the machine.
- It is possible to clean both carpet and hard floor with a single machine. The commutation from carpet to hard floor cleaning and vice versa is done easily, simply turning the lever on the vacuum head.
-
Possibility to push the machine forward on hard floor without lifting the vacuum head thanks to proper support wheels.
- Powerful and reliable brush motor which allows a strong brushing action.
-
Automatic adjustment system of the rotating brush pressure according to the kind of carpet.
-
Brush easily replaceable with no need of turning the machine over.
- Vacuum head in die-cast aluminium, practically indestructible.
- Special profile of the vacuum head, which allows a shorter drying time.
- The height of the handle is adjustable so that it can be regulated according to the stature of the worker.
-
Quick disconnect spray nozzles, which can be replaced by hand: the nozzles can be cleaned easily and without using any tool.
- The hand tool NS10PN-M, supplied as standard, allows to clean hard-to-reach corners.
- High density polyethylene tanks, very strong and made for lasting a long time.
- Transparent unbreakable cover, which allows to see the dirt while vacuuming.
- Recovery tank easily detachable from the machine body, in order to make the tank emptying and cleaning easier.
-
Easily accessible hole for clean water filling
- The filters of the vacuum motor are easy to reach and removable for an easy cleaning.
- The gasket are not glued and replaceable by hand. Easy to clean and change.
- Strong wheels, in antimark rubber.
- Brass quick-disconnect couplings, reliable and strong.
- Water pump with bypass, which allows the automatic regulation of the optimal water lift according to the tool used. Moreover, the bypass device makes the pump more reliable and avoids problems in the years.
- Pump built on Santoemma specifications, for lasting long.
- Vacuum motor with thermal protection against overload.
- Vacuum motor treated against rust.
- Both motor and pump can work continuously.
- Brush motor with thermal protection against overload.
- Stainless steel brush bearings for a longer life.
- Modular design that makes the maintenance easier. It can be done at low costs.
|
Approximate performance*:
|
50-120 m²/h |
|
Recovery tank capacity:
|
14 litres |
Solution tank capacity:
|
14 litres |
|
Vacuum motor:
Power:
Maximum waterlift:
Maximum air-flow:
|
2 stages - High waterlift
1500 W
3000 mm H2O
45 l/sec. |
|
Pump with by-pass:
Power:
Maximum pressure:
Maximum water-flow:
|
vibrating
70 W
4 bar
1,5 l/min |
|
Cleaning width (carpet/hard floor):
|
270/290 mm |
|
Number of nozzles:
|
3 |
| Adjustable waterflow: |
Yes |
|
Rotating brush:
|
120 W
600 rot/min
232 mm |
|
Cable lenght:
|
10 m |
|
Hose lenght:
|
2,5 m |
|
Weight (machine body):
|
24 kg |
|
Weight (packaged machine):
|
27 Kg |
|
Dimensions:
|
cm 29 x 78 x 90 h |
|
Package dimensions:
|
cm 36 x 60 x 80 h |
|
Units/pallet:
|
8 pcs/ pallet
(cm 80 x 120 x 173 h) |
|
Standard color:
|
Blue |
|
Tank construction:
|
High density polyethylene |
|
Sound pressure level (3m/1m - ISO3744):
|
69 dB(A)
/ 75 dB(A) |
|
Power supply:
|
Cable - 220-240V 50-60Hz
(other voltages on request)
|
| (*) The effective performance depends on the type of cleaning required: restorative deep cleaning - maintenance cleaning. |
Included accessories
The machine is supplied as standard with the following accessories:
Recommended accessories and devices
In order to optimize the results that can be obtained by this model, we suggest the adding the following accessories and special devices:
Other compatible accessories and devices
Below are listed all the accessories and devices that can be used with this machine
