IdroFoamRinse FOOD 400

▸ PRODUCTS ▸ FOOD ▸ IDROFOAMRINSE FOOD

Model designed to foam and rinse the surfaces to be cleaned and sanitized, with unlimited autonomy.

Rinsing flow optimized for medium and large environments.

Autonomy
unlimited

Rinsing
5,5 l/min @ 18 bar

Complete cleaning/ Quick sanitization
Surface of 120m² in 20/2 minutes

IdroFoamRinse FOOD 400 is an innovative, electric-powered machine patented by Santoemma to spray compact foam and rinse continuously.

Suitable for performing thorough cleaning and sanitization in food preparation areas, such as: supermarkets, food companies, industrial kitchens.

The water used for foaming and rinsing is taken directly from the water supply, so the machine has unlimited autonomy. Pure detergent is contained in a separate tank and is automatically used by the machine in appropriate amounts.

The internal compressor allows the foam to be produced with optimal density. There is no need to connect the machine to an external compressed air system.

Rinsing is carried out at an optimal pressure, which allows residual foam and dirt to be quickly removed.

The cleaning process is carried out through three stages:

Spraying of foam on all the surfaces
Cleaning and sanitizing chemical action
Rinsing with clean water, at a controlled pressure

Using optional devices, the same machine also allows a chemical to be nebulized to quickly sanitize previously cleaned surfaces and environments.

Santoemma has developed 3 nebulizing systems to provide the ideal solution in every situation:

a) nebulization@100micron - for surfaces

b) turbo-nebulization@50micron - for surfaces and environments

c) dryfog@7micron - for surfaces and environment

a) Nebulization@100micron

The IdroFoamRinse FOOD models, equipped with a specific gun, are able to nebulize the sanitizing chemical in the form of a liquid solution in 100 micron particles. With the nebulization at 100 micron the particles deposit evenly on the surfaces wetting them slightly and after a few minutes the particles evaporate, leaving the surfaces dry. In this way the chemical is able to act for the necessary time to carry out its sanitizing action. This is the ideal solution to quickly sanitize all washable surfaces.

b) Turbo-Nebulization@50micron

The IdroFoamRinse FOOD machines are able to nebulize a sanitizing chemical through a specific hand gun for turbo-nebulization@50micron. This gun allows you to deliver a mixture of air and very fine particles of pure sanitizing product with a diameter of only 50micron.

Their small size allows the particles to remain in suspension in the sanitizing air jet, which can reach points 4 meters away from the operator. By directing the jet appropriately, it can easily reach every point in the room and saturate small rooms quickly and evenly.

c) Dry fog@7micron

With turbo-nebulization@50micron, the particles wet surfaces very little, leaving them only slightly damp for a few minutes. In this way, the product is able to act for as long as it takes to perform its sanitizing action in all points.

Moreover, by adding a special Santoemma device, it is possible to deliver a sanitizing chemical in the form of 7 micron dry fog. The dry fog is delivered for a time sufficient to completely fill the rooms and then left to act for a few minutes in order to exercise its sanitizing action. This type of dry fog allows you to reach every point, without wetting the surfaces. The machine can be left inside the room to be treated. Alternatively, you can leave the machine out of the room, placing inside only the chemical tank.

IdroFoamRinse FOOD 400 is indicated for a complete cleaning and sanitizing of all the surfaces, including walls, refrigerator cells, work-tables, machinery and transport trolleys in food processing areas, such as:

Supermarkets, in food preparation areas (fish and meat processing) and storage areas (refrigerator cells),
Medium-sized factories producing and packaging food (meat, salami, fish, milk/cheese, vegetables), butcheries, dairies,
Big food factories, to clean machinery, equipments, transport trolleys,
Caterings and industrial kitchens, to clean rooms and food preparation areas.

Better cleaning and sanitising result: dense foam does not immediately fall onto the floor, but stays on the surfaces where it has been sprayed for some minutes. The foam prolonged action assures to make the most of the cleaning effect of the product, ensuring both cleaning and sanitising effect.
Visual effect of foam: foam covers in white all the surfaces where it is sprayed such as walls, sinks, fixtures. The operator can therefore check that every corner has been covered, thus allowing a complete action in every point.
Complete sanitizing action: Laboratory tests certify that using the machine in combination with specific chemicals, it is possible to kill 99,9% of bacteria.
Rinsing at a controlled pressure avoids that any particle is jumping on other surfaces and prevents the creation of a haze of water vapours, which would keep in suspension the micro-organisms for several minutes. These micro-organisms would fall again on the surfaces after rinsing, affecting the efficacy of the bactericide action.
Saving of time: while foam acts on the surfaces where it has already been sprayed, the operator is free to operate on other surfaces. Therefore, even a big room can be completely foamed in a short time and there is no idle time.
Detergent saving: the chemical is used without waste because it does not immediately fall onto the floor.
Reduced power consumption: the machine requires little electrical power and therefore it can be used in any place.

The machine has a contained size and it is easy to carry from place to place.
The machine can work with unlimited autonomy in foaming and rinsing, thanks to a continuous filling system which takes water directly from the water network.
Foam is generated by an internal compressor, therefore it is not necessary to connect the machine to an external compressed air system.
The control/regulation panel is handy and the controls are simple and intuitive.
Pure chemical is contained in its separate tank, having a volume up to 25 liters, and it is automatically used by the machine in a controlled quantity.

Approximate performance:	Surface of 120m²
1) Complete cleaning and sanitizing: Time: Chemical consumption: Water consumption: Defoamer consumption:	20 min 1200 gr (10gr/m²) 70 liters -
2) Quick sanitization:
2a) with Nebulization@100micron Time: Chemical consumption: Water consumption:	2 min 200 gr (2gr/m²) 3500 gr (30gr/m²)
2b) with Turbo-Nebulization@50micron Time: Chemical consumption: Water consumption:	3 min 240 gr (2gr/m²) -
2c) with KIT for Dry Fog@7micron Time: Chemical consumption: Water consumption:	30 min 1200 gr (4gr/m³) -
Foaming autonomy:	unlimited
Rinsing autonomy:	unlimited
Chemical dilution:	Pre-set around 4%
Continuous filling system:	YES
Pump with by-pass: Power: Max pressure: Rinse pressure: Rinse water-flow:	piston type, adj.pressure 370 W 30 bar 18 bar 5,5 l/min
Compressor:	350W
Cable length:	10 m
Weight (machine body):	59 kg
Weight (packaged machine):	82 Kg
Dimensions:	60 x 87 x 98 cm
Package dimensions:	65 x 102 x 86 cm
Units/pallet:	1pc/pallet (65 x 102 x 86h)
Spray hose length:	15 m
Standard color:	Black
Noise pressure level - ISO3744 (1m):	69 dB(A)
Power supply:	cable - 220-240V 50-60Hz (other voltages on request)
International Patents:	EP 22772603.1 + US 18/683358 + CN 202280057576.4